Wednesday, December 14, 2011
0
Every Step Is Same As We Did In Other Gingerbread Roms Just Files Are New And They Named Same
To flash your Ace with new firmware on windows you will require Odin. Then you can search and download the Flash Files from tsar3000.com. If you are facing problem downloading the file you can also download it from here
Open odin and point OPS, BOOT, Phone, PDA and CSC files from the firmware folder as follows.OPS- Cooper_v1.0.opsBOOT- APBOOT_S5830XXKP8_CL143019_REV03_user_mid_false.tar.md5Phone- MODEM_S5830XXKP8_CL143019_REV03.tar.md5PDA- CODE_S5830XXKP8_CL143019_REV03_user_mid_false.tarCSC- CSC_S5830SERKP8_CL143019_REV03_user_mid_false.tar.md5
Pointing these files in Odin completes the configuration part. There is no need to change any other settings. Before proceeding to the next step make sure that Samsung Kies is not running, if so close it.
Middle Menu Button+ Power Button+ Down Volume Buttom. Make sure you do not disturb the sequence. Else other modes may come up. Once the phone boots in download mode the phone setup is ready.
Now connect the phone to your computer using data cable. You will find some drivers installing and Odin will automatically identify connection com port. Ensure that the data cable is fixed properly so that connection is not lost in between the process.
When all the above things are done, Click on the start button. Wait till the process gets over. You can see process status at left hand corner of Odin. The phone will be restarted automatically and will take bit time to finally start with Gingerbread.
The default language of this Firmware is not English, if you want to change it to English, go to settings and select the fifth last option. There you can select the language of your choice.
every thing like rooting etc. can be done same as in others
enjoyyyyyy
[How To] Downgrade Galaxy Ace To 2.3.3 Unofficial
Every Step Is Same As We Did In Other Gingerbread Roms Just Files Are New And They Named Same
Things Needed to Install Gingerbread on Ace
To flash your Ace with new firmware on windows you will require Odin. Then you can search and download the Flash Files from tsar3000.com. If you are facing problem downloading the file you can also download it from hereSetting Up Odin
Once these files are downloaded extract the files. Odin is a portable application hence can be brought up with a single click. Remember to take care of files that you are going to put in Odin. Open the firmware folder which you just extracted. You will find 5 files namely:APBOOT_S5830XXKP8_CL143019_REV03_user_mid_false.tar.md5CODE_S5830XXKP8_CL143019_REV03_user_mid_false.tarCooper_v1.0.opsCSC_S5830SERKP8_CL143019_REV03_user_mid_false.tar.md5MODEM_S5830XXKP8_CL143019_REV03.tar.md5Open odin and point OPS, BOOT, Phone, PDA and CSC files from the firmware folder as follows.OPS- Cooper_v1.0.opsBOOT- APBOOT_S5830XXKP8_CL143019_REV03_user_mid_false.tar.md5Phone- MODEM_S5830XXKP8_CL143019_REV03.tar.md5PDA- CODE_S5830XXKP8_CL143019_REV03_user_mid_false.tarCSC- CSC_S5830SERKP8_CL143019_REV03_user_mid_false.tar.md5Pointing these files in Odin completes the configuration part. There is no need to change any other settings. Before proceeding to the next step make sure that Samsung Kies is not running, if so close it.Preparing Galaxy Ace for Flash
Remove the SIM card and SD card from the phone. now what you have to do is start the phone in download mode. To do this, while you are switched off press and hold the following buttons in sequence.Middle Menu Button+ Power Button+ Down Volume Buttom. Make sure you do not disturb the sequence. Else other modes may come up. Once the phone boots in download mode the phone setup is ready.Flashing Galaxy Ace with Gingerbread
Now connect the phone to your computer using data cable. You will find some drivers installing and Odin will automatically identify connection com port. Ensure that the data cable is fixed properly so that connection is not lost in between the process.When all the above things are done, Click on the start button. Wait till the process gets over. You can see process status at left hand corner of Odin. The phone will be restarted automatically and will take bit time to finally start with Gingerbread.The default language of this Firmware is not English, if you want to change it to English, go to settings and select the fifth last option. There you can select the language of your choice.every thing like rooting etc. can be done same as in others
enjoyyyyyy
Subscribe to:
Post Comments (Atom)
0 Responses to “[How To] Downgrade Galaxy Ace To 2.3.3 Unofficial”
Post a Comment